RTR 1/24 Electric Remote Control Off Road Car 2401A 35KM/H High Speed RC Vehicle CVD Drive Shafts Metal Chassis Brushed Motor

Attention!!

Protective film is attached to the car shell and rear wing. This is not a defect; you may peel it off at will.

Brushed Motor Type

#Specification: 

Item Condition: New, Painted and Assembled

Scale: 1/24

Material: Plastic, Metal

Car Size: About 170*110*48MM/6.7*4.3*1.9 Inches

ESC: 8A Brushed ESC

Motor: 130 Brushed Motor

Servo: 5G Servo

Vehicle Battery: 7.4V Li-Po (Included)

Remote Control Distance: 30-50 Meters

Charging Time: About 30 minutes

Run Time: About 20 minutes

#The Package Includes:

1/24 RC Off Road Car Model

Remote Controller and Receiver

Vehicle Battery

USB Charging Cable

Instruction Book

#The Package Does Not Include:

Light System

Sound System

Remote Controller Battery

#Features:

1. This is a 1/24 scale 4WD electric off-road vehicle, suitable for both indoor and outdoor use with few site restrictions. The included jump ramp adds more playing styles and fun.

2. This brushed version reaches a top speed of 35 km/h. Equipped with miniature hydraulic shock absorbers and gyroscope to absorb road vibrations and handle uneven terrain easily. Four CVD universal drive shafts ensure high transmission efficiency and stable performance without severe shaking at high speed. Rubber tires deliver excellent grip and wear resistance.

3. Built with 6061 aluminum alloy chassis for high rigidity, resistant to deformation during jumps and stunts. The whole vehicle uses Grade 12.9 M2 hex socket screws. A 1.5mm hex screwdriver is required for assembly and maintenance, and the screws are not easy to strip after repeated use. (1.5mm hex screwdriver not included)

4. Front and rear differentials are installed. You can adjust the tightness of 3 screws on the differential to change the locking ratio for different driving scenarios.

5. The motor mount is CNC machined. The battery holder is directly connected to the aluminum base to help dissipate motor heat efficiently. The battery comes with a protection board with power management IC, featuring overcharge, overdischarge and overcurrent protection. It will cut off power automatically when voltage is too low to prevent battery damage. A standard USB fast charging cable is included, and the battery can be fully charged in just 30 minutes.

6. Fitted with standard 5g protective steering servo, separate receiver and ESC. Advanced users can upgrade electronic components as needed.

Brushless Motor Type

#Specification: 

Item Condition: New, Painted and Assembled

Scale: 1/24

Material: Plastic, Metal

Car Size: About 170*110*48MM/6.7*4.3*1.9 Inches

ESC: 15A Brushless ESC

Motor: 6800KV Brushless Motor

Servo: 5G Servo

Vehicle Battery: 7.4V Li-Po (Included)

Remote Control Distance: 30-50 Meters

Charging Time: About 30 minutes

Run Time: About 30 minutes

#The Package Includes:

1/24 RC Off Road Car Model

Remote Controller and Receiver

Vehicle Battery

USB Charging Cable

Instruction Book

#The Package Does Not Include:

Light System

Sound System

Remote Controller Battery

#Features:

1. This is a 1/24 scale 4WD electric off-road vehicle, suitable for both indoor and outdoor use with few site restrictions. The included jump ramp adds more playing styles and fun.

2. This brushless version delivers stronger power burst and quicker control response, with a top speed of 45 km/h. Mini hydraulic shock absorbers and gyroscope effectively dampen road vibrations for reliable performance on bumpy terrain. Four CVD universal drive shafts ensure high transmission efficiency and stable operation without vibration at high speeds. The rubber tires offer excellent grip and wear resistance.

3. Built with 6061 aluminum alloy chassis for high rigidity, resistant to deformation during jumps and stunts. The whole vehicle uses Grade 12.9 M2 hex socket screws. A 1.5mm hex screwdriver is required for assembly and maintenance, and the screws are not easy to strip after repeated use. (1.5mm hex screwdriver not included)

4. Front and rear differentials are installed. You can adjust the tightness of 3 screws on the differential to change the locking ratio for different driving scenarios.

5. The motor mount is CNC machined. This brushless model allows gear ratio adjustment to tailor speed for different racing tracks. The battery holder is directly attached to the aluminum base to enhance motor heat dissipation. The battery is fitted with a protection board with power management IC, featuring overcharge, overdischarge and overcurrent protection. It automatically cuts off power at low voltage to prevent battery damage. A standard USB fast charging cable is included, and the battery can be fully charged in 30 minutes.

6. Fitted with standard 5g protective steering servo, separate receiver and ESC. Advanced users can upgrade electronic components as needed.

Attention: The car shell and rear wing are covered with protective film, which is not a defect and can be removed by the customer themselves

#If you have any questions or are not sure whether it is the correct item you want, pls feel free to contact me before purchasing.

#Shipping Policy: 

1. We ship to most countries of the world. But if you are from Israel, Brazil, South America, and the Middle East, please contact me first, because sometimes we can not ship to your country because of shipping limitations. 

2. Different shipping methods have different transportation timeliness. If you have any requirements on the shipping method, please contact us, and we will provide you with the optimal shipping plan.

#Return Policy: 

We only wish to deal with a serious buyer.

Please don't easily open a dispute or return request if your products got problems. Please contact us, we will help you to solve any problems, and we have professional technicians to provide technical support.

#International Buyers Please Notes

Import duties, taxes, and charges are not included in the item price or shipping cost, these charges are the buyers' responsibility.